20
Remote Control
No.
Element
Function
1
MUTE
Mutes the PA zone
2
/-
Selects the signal source
3
/-
Adjusts the high frequencies
4
/-
Adjusts the volume
5
POWER
Turns the PA zone on and off
6
BASS +/-
Adjusts the low frequencies
7
B/-
Adjusts the balance L/R of the speakers in
stereo mode
8
Battery
compartment
For two 1.5 V AAA batteries
Note: When actuating a button, always direct the remote control towards the
sensor on the wall controller. There must be no obstacles between remote
control and the sensor. If the range of the remote control decreases, the
battery is probably exhausted and must be replaced.
Wall Controller
No.
Element
Function
1
Lights up during volume settings
2
Indicates the connection status to the amplifier
3
Lights up during sound settings
4
DIP switches
Selects the PA zone (see printing)
5
Lights up during muting
6
Display
Indicates the signal source, PA zone, volume and sound settings
7/8
▲ and ▼
Adjust the values
9
SELECT
Selects the settings for the PA zone
10
Infrared sensor
For the included remote control or one of the signal sources when using IR
emitters (accessory) for IR extension
11
MUTE
Mutes the PA zone
12
On/off switch
Turns the PA zone on and off
The button lights up white when the PA zone is turned off and blue then
the PA zone is turned on
13
RJ-45 port
For connecting the hub via a network cable (max. 200 m)
