00029891.DOC, Version 1.0
23/26
Selection of the operation mode (Preset)
The DXO-48E can be adjusted to 10 different operation-modes.
Please note:
if you change the operation-mode, all routings and links will
be changed, too. Always select the operation-mode first. Afterwards, you
adjust the output adjustments, routings, delay-links and output designations.
Select the desired operation-mode in the setup-menu and confirm by
pressing the Save/Enter-button.
In the Annex, you can find an overview of the different presets.
Programs
Calling up programs
You can call up a program from already saved programs via the Recall-
button.
Select the desired program via the jog-wheel.
Press the SAVE/ENTER-button another time in order to call up the desired
program.
Store a program
You can save up to 30 programs. Press the SAVE/ENTER-button for
saving. The display shows the last used program.
Turn the jog-wheel for adjusting program 1-30. By pressing the PREV-
button or NEXT-button, you can navigate the submenu (e.g. enter next
letter, correct the previous one). By turning the jog-wheel, you can select
the letters.
Press the SAVE/ENTER-button to confirm.
Safety options
The DXO-offers the possibility to protect the settings from unauthorized
access.
Modify only:
The parameters can be viewed but not be changed. Mute is possible.
View:
The parameters cannot be viewed and not be changed. Mute is possible.
Mute:
The parameters can be viewed. Changes and mute are not possible.
Everything:
Everything is locked.
By turning the jog-wheel, you can adjust the desired parameter. Press the SAVE/ENTER-button to enter the
password area (4 letters).
Summary of Contents for DXO-48E
Page 2: ......
Page 26: ...Appendix Preset modes ...