16
•
EN
Surface mounting
Using the short brackets (type B) it is possible to mount the device vertically on a wall or upside down under
a table. In the latter case, simply turn the brackets around (figure b). If the brackets are to be hidden under
the unit, refer to figure c. In each case, remove 3 screws from each side of the device and attach the
brackets.
Using the connection plate C, 2 devices can be mounted on top of each other. To do this, remove 2 screws
from each side of the unit and attach the connecting plate as shown.
Summary of Contents for DJP-604
Page 1: ......
