21
The standard OmniBeacon™ is intended to be mounted
using the 3/4” conduit fitting which extends out of the bottom
of the device. If you are replacing an existing alarm light with
the OmniBeacon™, and you have a large hole to cover, the
OmniBeacon™ accessory plate can be used to cover the
hole as shown in Figure #1.
The metal plate should be sandwiched between (2)
rubber gaskets to provide a complete seal.
NOTE:
Do not attempt to cover a large hole without this plate. The siren on the
bottom of the OmniBeacon™ is not weathertight and will allow water to leak
into your control panel without the adaptor plate.
Summary of Contents for OmniBeacon GuardDog
