37
Upload Omnipod
®
Insulin Management System
PDM Data to a Computer:
To upload glucose readings, insulin and carb data from your Omnipod
®
System PDM to your PC or Mac Computer, you will need an
Omnipod
®
System USB Cable
, which was included in your Omnipod
®
System
Starter Kit.
If you need a new cable, order it here: http://shop.glooko.com/
products/insulet-provided-glooko-subscription
+
This cable is at no charge to Omnipod
®
System users (standard S&H rates apply).
1. On your computer, open your Internet browser and go to:
my.glooko.com
.
2. Log into your Glooko account by entering in your
and
Password
. Click
Sign in
.
3. Use the top navigation bar to open
Settings
.
4. Scroll down to a section called Apps & Devices. Click
Upload Omnipod
®
Data
.
5. Connect your Omnipod
®
System PDM to your computer using the Omnipod
®
System USB Cable:
• Plug the USB side of the cable into your computer.
• Plug the Mini-USB side into your Omnipod
®
System PDM.
* Note: To upload data from your Omnipod
®
System PDM to Mac computers manufactured before
mid-2012 utilizing Apple
®
’s OS X El Capitan software (version 10.11), it is recommended to use a
USB Hub
:
• Plug the USB Hub into your computer
• Plug the USB side of the Omnipod
®
System USB Cable into the USB Hub.
• Plug the other end of the Omnipod
®
System USB Cable into your Omnipod
®
System PDM.
6. After connecting the Omnipod
®
System PDM to your computer, wait for the Omnipod
®
System
PDM to prepare your data file. Your Omnipod
®
System PDM display will say “USB device ready”.
7. On your computer, click
Upload
.
8. Your Omnipod
®
System PDM data file will appear in your Finder Window, displayed as a new
drive (likely labeled as “NO NAME” on Mac or “Removable Disk/USB Drive” on PC). Click on the
associated drive.
9. In the drive, open the
.ibf file
: click on it and then click
Open
in the Finder Window.
10. Click
Done
to stay on the Settings page or click
View Data
to see your Daily Overview.
INSULET PROVIDED GLOOKO
