5
All rights reserved. ©2016 OMNICOMM
HARDWARE INSTALLATION
Step 1. Mount Hole Location
The right mounting location for LLS on the tank is the mechanical centre of the tank's upper part (Figure 1a).
Figure 1a. Mounting location for LLS.
Figure 1b. Mounting holes locations and diameters.
The wrong locations for LLS are the edges of the tank's or reservoir's upper part. Wrong LLS location might result in
spurious draining and fuelling (Fig. 1a). In some cases of vehicle's configuration it’s impossible to get to the mechanical center
of the tank's (or reservoir's) upper part. In this case the tank should be dismounted off the vehicle for the correct (and easy)
LLS installation.
Step 2. Drilling holes at the Fuel Tank
Figure 2a. Hole Saw for main hole, 35 mm
diameter, general view.
Figure 2b. Hole Saw 35 mm diameter, view from the tip of drill bit.