3-6
Drawers
Pharmacy Drawer Installation
OmniRx Service Guide
/67-2023 Rev D
© 2010 Omnicell, Inc.
Figure 3-4.
Remove the screws securing the false drawer front
4. Remove the
Figure 3-5.
Remove the slide support bracket
5. Connect the
to the drawer connect board.
6. Use a piece of double-sided tape to attach the
to the drawer cable.
7. Line up the tape to the edges of the clamp and secure the clamp to the carrier with two
using a Torx T15 screwdriver.
8. Connect a slide to the left side of the carrier with the three
provided using a Torx T15
screwdriver.
9. Connect the drawer
to the drawer controller board at the rear end of the
drawer.
10. Replace the slide to the slide mounting bracket with three
using a Torx T15 screwdriver.
Note:
Keep the screws securing the false drawer front. They will be used later in the procedure.
Summary of Contents for OmniRx
