Omnia-6ex Use and Operation Manual – V: 1.20
31
Menu Overview
This section presents an overview of the seven menus (Preset, Process, Input, Output, Encode, Schedule and
System) and their parameters. The Menu Selections section, starting on Page 34, gives in-depth descriptions and
usage instructions for each menu item and parameter selection.
Preset
Omnia-6EX is equipped with numerous factory presets that can be used to instantly configure the processing for
common applications. Highlighting Preset and clicking the jog wheel will open the Preset menu. Appearing here is a
list of all of the presets stored on the Omnia PC Card. Highlighting a Preset and clicking “Choose” allows that preset
to be loaded into the Omnia-6fm, instantly setting the various processing parameters. You may also compare and
modify settings between presets, save the current processor settings to an existing or new user preset, rename or
delete user presets and password protect user presets using options found on this menu. See Page 34 for details.
Process
Highlighting and clicking Process opens up the Process menu, shown below:
Process Menu showing Processing Signal Chain
This is where the processing power of the Omnia-6EX can be fine-tuned, and your station’s individual sound
customized. Each processing subsection in the Omnia-6EX (shown in block diagram format) can be highlighted and
clicked to open a parameter window with all of the available controls assigned to that function.
Since you cannot build a preset from scratch, a factory preset must be used as a starting point for creating your
“signature sound.” Each signal processor section (from the Wideband AGC to the Clippers) can be individually
selected, and its parameters adjusted as required. Once the processing is adjusted, the Preset menu “Save As”
function is used to save your newly edited factory preset to the PC Card as a new user preset. See Chapter 5, “Fine
Tuning Your Sound”, for an in-depth discussion of using this menu to edit presets.