Cleaning and maintanence
Never use aggressive detergents, alcohols, or other chemical solutions, because they can
damage the surfaces or even impair product performance.
Never immerse the device in the water.
Danger of burns! Do not touch the hot nozzle directly with bare hands.
a) External sufraces
- use a dry, soft cloth or brush to clean the outside of the 3D printer
b) nozzle
from outside
- use the tweezers to remove any residual filament from the printer nozzle after each print. You can do this
by heating the nozzle to the softening temperature of the filament
inside
- heat the nozzle and then load and unload the filament several times until the flow is as expected. If after
this process the nozzle is still not extruding the correct amount of material, unload the filament and use a
small needle. Push the needle through the nozzle and then make several up and down strokes until the
nozzle is free of all debris