OMNI-624/OMNI-624EU Installation and Setup Guide
6-52
2. Press the INSTANT key to move the cursor to the desired location within that Question.
3. Press one of the character display keys (see table below) to display the character set.
4. When the desired character appears, press INSTANT. The character is accepted and the cursor
moves to the next location. To move to a previous location to change a character, if needed, press
CODE.
5. When the descriptor is complete, accept the entry by pressing [
✱
] then the next Question number.
Refer to the following chart when entering descriptors:
Key
Function
INSTANT
Accepts displayed character and moves cursor forward one
position.
CODE
Moves cursor backward one position.
[7]
Displays next character in character set.
[9]
Displays previous character in character set.
[#] [7]
Automatically scrolls character set display forward.
[#] [9]
Automatically scrolls character set display backward.
[8]
Stops auto scrolling.
[0]
Inserts a blank character.
QUESTIONS 01–24 ZONE DESCRIPTORS FOR ZONES 01–24
L1
L2
L3
L4
L5
L6
L7
L8
L9
L10
L11
L12
L13
L14
L15
L16
These questions allow you to enter up to 16-digit descriptors for each zone. Each digit corresponds to a
single descriptor character. Use the separate Programming Form to enter the actual descriptors for
each zone.
Descriptor For:
Descriptor For:
Descriptor For:
Descriptor For:
Q 01 ZONE 1
Q 07 ZONE 7
Q 13 ZONE 13
Q 19 ZONE
19
Q 02 ZONE 2
Q 08 ZONE 8
Q 14 ZONE 14
Q 20 ZONE
20
Q 03 ZONE 3
Q 09 ZONE 9
Q 15 ZONE 15
Q 21 ZONE
21
Q 04 ZONE 4
Q 10 ZONE 10
Q 16 ZONE 16
Q 22 ZONE
22
Q 05 ZONE 5
Q 11 ZONE 11
Q 17 ZONE 17
Q 23 ZONE
23
Q 06 ZONE 6
Q 12 ZONE 12
Q 18 ZONE 18
Q 24 ZONE
24
QUESTIONS 25–26 PARTITION DESCRIPTORS
L1
L2
L3
L4
L5
L6
L7
L8
L9
L10
L11
L12
L13
L14
L15
L16
This question allows you to enter up to 16 digits for partitions 1 and 2. Each digit
corresponds to a single character in the descriptor.
Q 25 DESCRIPTOR FOR PARTITION 1
Q 26 DESCRIPTOR FOR PARTITION 2
