THE IDENTIFICATION PLATE MUST NEVER BE REMOVED.
1.10 GENERAL SAFETY INFORMATION
During project and manufacturing phases, the Builder paid careful attention to all those situations
that might cause risks to the safety and the health of people. The relevant laws were fully
respected and all the “rules of good building technique” were applied. The aim of this type of
information is to raise the awareness of users on the importance of preventing any risk, always
using caution.
Carefully read the information reported in the manual and placed directly on the machine,
especially safety information.
Please read this manual carefully before using or servicing the machine.
Do not tamper with, sidestep, eliminate or bypass the safety and warning devices
installed on the machine. Non-compliance with this requirement can cause serious risks
and can compromise the safety of people.
Omni
SUPERPLUS EN IGM_REV6
10
www.omnigroup.com.au
Ph : 1300 764 963
