Setup Procedure
17
When finished activating all the TPM sensors, you may be
required to drive the vehicle a specified distance and speed
in order for the TPM control module to store the current tire
pressures as new setpoints to be monitored. Refer to your
Omitec TPM System Quick Reference Guide for more
information.
8.
TPM Sensor Type Selection Chart
Refer to this chart for the combination of LEDs to be illuminated to
activate the type of TPM sensor under test. (A lightened circle indicates
the LED is illuminated.)
TPM Sensor Type
Siemens 2005
Beru
TRW
Pacifica
Helpful hints on valve types
OmiDetect is capable of activating various types of TPM sensors already
fitted to tires/wheels. However, different types of sensors operate in
different ways. For example, as part of a battery life saving measure, a
new BERU valve may need to be fitted to a tire and subjected to a normal
tire pressure for approximately 10 minutes before it will react to
OmiDetect’s command signal to wake up. But sensors such as Siemens
can be ‘excited’ prior to fitting them to a tire/wheel without any
preconditioning.
Summary of Contents for OmiDetect 100
Page 1: ...CH041006 Rev A 1 User s Manual OmiDetect 100 TPM Sensor Tester OM503 2...
Page 27: ......
Page 29: ......
