Safety Information
9
3.
Kit Contents
Your OmiDetect 100 kit includes:
OmiDetect 100 TPM Sensor Tester
9V 6LR61 Battery
OmiDetect 100 User’s Manual
OmiDetect’s internal 9 volt battery
Important: Your OmiDetect system’s internal 9 volt alkaline battery must
have sufficient charge for the system to work properly. If it drops below
the minimum required, after you power the tester on, it will sound a
constant tone and illuminate the Low Battery Indicator LED (see Sec. 4)
for 5 seconds, then the system will automatically power Off. OmiDetect
will not indicate a valid test result when the battery is low.
For optimum performance, the recommended batteries are PP3, IEC
6LR61 or 6F22. Do not dispose of batteries in household refuge. Some
communities offer recycling or collection of alkaline batteries. Contact
your local government for disposal practices in your area.
To replace the battery:
1.
Remove battery compartment door from back of unit and
check that the 9V alkaline battery is properly connected to the
battery wiring harness connector.
2.
Replace battery compartment door.
Summary of Contents for OmiDetect 100
Page 1: ...CH041006 Rev A 1 User s Manual OmiDetect 100 TPM Sensor Tester OM503 2...
Page 27: ......
Page 29: ......
