RhinoBond Owner’s Manual
Page 3
Seam M
ode
OFF O
n
Device Ready
Mode
OptiW
eld
Membr
ane
PVC 60 mil
Activations
Today
0
THE RHINOBOND SYSTEM
Heat Sinks
(6 included with a
carrying case)
Activation
Button
Touchscreen
Display
Power Cord
Height
Adjustment
for Handle
Induction
Coil
Handle
RhinoBond
with
OptiWeld Tool
with carrying case
READ & UNDERSTAND
all operating instructions before
using this tool.
DO NOT USE THIS TOOL
if you have (or anyone near you has)
a
pacemaker, surgical implant, prosthesis or other med-
ical device.
The RhinoBond tool may interfere with proper
medical device operation.
DO NOT activate tool over metal objects in/on the floor.
DO NOT use the cord to carry the tool.
UNPLUG THE CORD before attempting to inspect or clean the
tool, or you risk electric shock.
DO NOT
activate tool over the power cord.
KEEP CORD AWAY FROM
heat, liquids, sharp edges and
moving parts.
STAY ALERT.
Do not use this tool when tired or under the
influence of drugs, alcohol or medication that can alter your
awareness.
3"
75mm
DO NOT
allow any object containing metal, such as keys,
jewelry, watches etc., within 3 inches (75mm) of the bottom of
the tool during use.
IF CORD IS DAMAGED,
immediately discontinue using the
tool and contact OMG Roofing Products at 800.633.3800 for
repair.
DO NOT
operate the RhinoBond tool during periods of rain or
in wet conditions. Keep the tool dry at all times.
ALWAYS ENSURE
that the tool is properly grounded (CFCI
Circuits are best) and that power is from a safe and reliable
source.
ALWAYS WEAR
proper personal protective equipment when
working on a roof.
SAFETY
Read and Understand all Instructions. Keep this manual for later reference.
INTENDED USE
The RhinoBond System
is intended for installing thermoplastic (i.e. TPO and
PVC) and “Clean EPDM” roofing membranes on commercial, industrial, institu-
tional and appropriate residential roofs. Its sole purpose is to bond, by induction
means, the bottom side of the roofing membrane to a washer or plate installed
to hold insulation and other roofing components in place, and serve as an attach-
ment point for the induction welding process. Only fasteners, washers and tubes
provided by OMG Roofing Products are approved for use with the RhinoBond
System.
The RhinoBond System produces heat that can seriously injure people
and damage metal objects.
Please be sure that you and all crew members
read and understand the instructions in this manual before attempting to use
the RhinoBond System. Failure to follow all instructions could result in
property
damage, serious personal injury, electric shock or death.
This appliance is not intended for use by persons with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Keep this tool out of the reach of children.
