pag.10
O.M.F.B. S.p.A. Hydraulic Components
We reserve the right to make any changes without notice.
Edition 2017.05 No reproduction, however partial, is permitted.
Via Cave, 7/9 25050 Provaglio d’Iseo (Brescia) Italy Tel.: +39.030.9830611
Fax: +39.030.9839207-208 Internet:www.omfb.it e-mail:[email protected]
4. Use in combination with the RADAR II 12CH receiver
RADAR II 12CH radio remote control systems are configured thusly:
• Qty. 3 4CH Receivers;
• Qty. 1 Transmitter.
The TXF transmitter controls, respectively, the first 4CH receiver on “Receiver A”, the second 4CH receiver on
“Receiver B”, and the third 4CH receiver on “Receiver C”: in other words, to activate the devices connected
to the first receiver, you must press the button “A”; to control the devices connected to the second receiver,
you must press the button “B”; finally, to control the devices connected to the third receiver you must press
the button “C”.
NB
: The receivers are perfectly identical to one another, and completely interchangeable. It is the operator
or installer who defines which are the first, second and third receivers, respectively, during the
programming stage described below.
4.1 Programming
1. Power up the receivers (insert the battery disconnector and any other switch that may be installed in
series with the receiver power supply).
2. On the transmitter: press a function button in the A, B or C column and make sure the TX LED lights
up flashing;
3. On the receiver 1: press the red emergency mushroom-head button: the buzzer inside begins to emit
a continuous sound;
4. See paragraph 2.1 to program with REED;
5. Make sure all functions connected to the first receiver of the radio remote control system are correctly
activated;
6. On the receiver 2: press the red emergency mushroom-head button: the buzzer inside begins to emit
a continuous sound;
7. See paragraph 2.1 to program with REED;
8. On the transmitter: press one of the function buttons (channel 1 Up/Down or channel 2 Up/Down)
in the column on which you wish to program the receiver, with the exception of those already
programmed in A, B or C.
9. Make sure all functions connected to the second receiver of the radio remote control system are
correctly activated;
10. On the receiver 3: press the red emergency mushroom-head button: the buzzer inside begins to
emit a continuous sound;
11. See paragraph 2.1 to program with REED;
12. On the transmitter: press one of the function buttons (channel 1 Up/Down or channel 2 Up/Down)
in the column on which you wish to program the receiver, with the exception of those already
programmed in A, B or C.
13. Make sure all functions connected to the third receiver of the radio remote control system are
correctly activated;
14. Test that the emergency function from the Transmitter is sent to the three receivers.
4.2 Use
1. Power up the receivers (insert the battery disconnector and any other switch installed in series with
the receiver power supply)
2. On the transmitter: press the desired functions, remembering that the first column is for receiver A,
the second column is for receiver B, and the third column is for receiver C.
3. The transmitter automatically switches off.
101-050
USER AND MAINTENANCE MANUAL
“RADAR NEW TXF”
Codice foglio: 997-101-50366 R
ev: //
Data: V
enerdì 16 giugno 2017
Codice fascicolo: 997-101-50370
