Any form of reproduction of the entire contents of this document or parts thereof beyond the private use is strictly prohibited.
Subject to alterations and errors. All texts, illustrations and symbols are the property of nimax GmbH.
49761_1_EN_Instruction Manual_REV_A
3 / 3
4. How to use and how to align the finderscope?
4.1.
An object is centered in the camera’s display.
In this example we have a house with a chimney. The
chimney is the reference point. The LED finder point should
point exactly at the center.
4.2.
Looking through the finderscope (it should be powered
on) we see the same building but in this case the red dot
and chimney are not centered. We adjust the finderscope
removing the caps from the adjusters so that the
finderscope’s red point moves slightly until it matches the
chimney. This is enough to correct the objects position in
the finderscope. Trial and error is required to get a
satisfactory result.
4.3.
After playing with the twoadjusters and some trial and
error we get the finderscope recticle close to the center (in
this case the chimney). The finderscope is now ready to
use!
