![background image](http://html1.mh-extra.com/html/omega/tcl-3m165e2-series/tcl-3m165e2-series_user-manual_4189795035.webp)
Series TCL-3M165E2
Operation
Technical changes reserved
- 35 -
5.5.2 Manage DUT
From the "Select DUT" window, you can use the
icon to go to the window "Manage DUT".
This window is different from the "Select DUT"
window only in the other elements in the toolbar.
The information box and selection list are the same.
The test specimens can be sorted, copied, deleted or
configured, or new ones created.
Operation of the window is analogous to the section
§ 5.4.2).
In addition, you can also create a new test specimen.
Create new DUT:
Tap on the
icon to create a new test specimen.
A new test specimen is created and the window "Configure DUT" is opened. Details
pertaining to the window can be found in the following section.
5.5.3 Configure DUT
From the "Manage DUT" window, you can use the
icon to go to the window "Configure
DUT".
Here, you can change the parameters of the selected
test specimen.
You can define the name, the serial number, the
minimal and maximal temperature, the adjustment
value and the type.
Tap on the parameter field of the desired
parameter.
The window of the parameter is opened. You can
configure the parameter there.
Operation is analogous to the section "Configure Function" (
§ 5.4.3), with the difference
being that the parameter field of the serial number is activated.
Serial number :
Input the new value of the serial number and confirm the input.
The new value is adopted and you will be returned to the previous window.