Page - 7
Page - 14
THE PARKING
LIGHTS WILL FLASH
REPEATEDLY
THE DOORS WILL LOCK or
UNLOCK
To Activate Panic Mode:
Press & Hold the LOCK or UNLOCK button for 3 seconds
•
The horn will sound, the parking lights will flash and
the doors will lock or unlock, depending on the trans-
mitter button used. To deactivate Panic, simply press
either the LOCK or UNLOCK button again.
OR
Feature #5 Doors Lock With Ignition On
Factory Default Setting:
Off (
press
“unlock” button to program
)
Option:
On (
press
“lock” button to program
)
This feature configures the system to automatically lock the vehicle’s doors every
time that the ignition switch is turned on. The following feature #6 controls the
automatic unlocking operations.
Feature #6 Doors Unlock With Ignition Off
Factory Default Setting:
Off (
press
“unlock” button to program
)
Option:
On (
press
“lock” button to program
)
Similar to the previous locking feature, except this feature controls the unlock
operation when the ignition is turned off.
Feature #3 Confirmation Chirp Function & Volume
Factory Default Setting:
Low
(
press
“lock” button to program
)
Options:
High (loudest)
(
press
“unlock” button to program
)
On Demand / High
(
press
“trunk” button to program
)
OFF (no chirps)
(
press
“start” button to program
)
This feature allows the choice of two different volume levels of the system’s con-
firmation chirps and the ability to turn OFF chirps or have them on demand. When
programming, the you can hear and choose the setting with the best chirp volume.
The “On Demand” setting allows you to lock and unlock the doors without chirps.
Pressing either function a 2nd time, will produce confirmation chirps.
Feature #4 Steady Siren or Pulsed Horn
Factory Default Setting:
Pulsed Horn Low
(
press
“lock” button to program
)
Options:
Pulsed Horn Medium
(
press
“unlock” button to program
)
Pulsed Horn High
(
press “trunk” button to program
)
Steady Siren
(
press
“start” button to program
)
This feature changes only the audible output, in three different pulse timings, which
allow a degree of customizing of the horn’s sound during the alarm activation. The
Steady Siren setting is exactly that- a steady output which an optional electronic
siren would require.
Feature #2 Steady/Flashing Lights During Remote Start
Factory Default Setting:
Steady (
press
“lock” button to program
)
Option:
Flashing (
press
“unlock” button to program
)
This Feature configures the operation of the vehicle’s parking lights during the
remote start operation. The default setting turns on the parking lights during remote
start; the other setting flashes the parking lights on and off during remote start.
Auxiliary Functions 1-4:
The actual operation of these functions will vary from car to car. They
are designed to operate extra vehicle functions like automatic sliding doors
or motorized hatches. Aux 1-4 are only available on certain vehicles when
this system is integrated with the vehicle’s data network. Consult with your
installing dealer to find out if any of these functions are available for your
vehicle. If so, confirm each operation with the transmitter and write each
function in the blank space provided below for later reference.
-
Auxiliary 1 Function (___________________): To activate this
function, press and release the “trunk” and “start” buttons simultaneously.
-
Auxiliary 2 Function (___________________): To activate this
function, press and release the “lock” and “trunk” buttons simultaneously.
-
Auxiliary 3 Function (___________________): To activate this
function, press and release the “unlock” and “start” buttons
simultaneously.
-
Auxiliary 4 Function (___________________): To activate this
function, press and release the “unlock” and “trunk” buttons
simultaneously.
Other Transmitter Functions
Using The Optional ECHO 2-Way Upgrade
“
start
” button
“
P
”rogram
button
“
unlock
”
button
“
lock
”
button
“
trunk
”
button
Please refer to the
ECHO manual for
further explanation
of it’s capabilities.
