manualshive.com logo in svg

Omega RD260A, User Manual

Share
Download
Omega RD260A User Manual Download Page 53

6 - 2

6.1  Setting Input Range and Recording Span (RANGE)

One of the following parameters can be set for every channel:
SKIP

Prevents the specified channel from being measured, recorded and displayed .

VOLT

Measures and records DC-voltage.

TC

Measures and records temperatures using Thermocouple.

RTD

Measures and records temperatures using Resistance Temperature Detector .

DI

Accepts Digital Input (contact/voltage level) and performs ON/OFF
recording.

DELT

Performs difference computation between two channels which have same
input range.

SCL

Performs scaling on voltage measurements.
Scaling results in appending a different scale to the measured values.

SQRT

Takes the square root (

) of DC-voltage measured data.

NOTE

Restrictions apply to the measurable types of input depending on the type of

recorder used.  Check your recorder type as indicated on the nameplate (see
page 1-4 of the instruction manual for details on the nameplate), and then refer
to the following table.

Model Code

Measurable Type of Input

SR100x-B-1

Voltage (VOLT), thermocouple (TC), contact (DI), SCL, SQRT

SR100x-B-2

Resistance temperature detector (RTD)

Summary of Contents for RD260A


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands