increment the latest digit (flashing) by pressing the
adjusting
key
until the
display matches the desired Update Time. Once completed, press the
setting
key
to load and save the parameter.
3.2.10 Loading All Parameters
After adjusting or confirming all parameters, the display will read “loAd”
for approximately 3 seconds. During this time, the parameters are saved
and loaded. The sensor will return to pressure display mode automatically.
3
-
2-
9
3.2.9 Update Time
The next parameter encountered is display update time. The time setting
can be from 0 (No Delay) to 9 seconds.
To set display update time,
