Omega PHB21, User Manual

Page: 17 / 38

98% 25.0ºC
->8.96pH @ 25ºC
Example for Reading, when
the bargraph was chosen
during Set Up Mode
<ESCAPE>
6.3.
Equipment Operation pH - Read
SELECT FUNCTION
mV ºC pH
pH: /
SET UP/CHECK
READ
pH: /
CALIBRATE/REG
READ
GO TO SAMPLE!
Ready?
MIN. ALARM:
->3.59pH @ 25ºC
============
====
============
===
END REPORT?
/ Yes No
15
Press key until option flashes, then
press key to confirm the option chosen.
<SELECT> pH
<ENTER>
Press key until option flashes, then
press key to confirm the option chosen.
<SELECT> Read
<ENTER>
Press key until option flashes, then
press key to confirm the option chosen.
Dip electrode into sample and press key.
<SELECT> Read
<ENTER>
<ENTER>
If the user had chosen Minimum
or Maximum Alarm during the
Set Up Mode, the values will be
displayed.
The End Report screen will only be displayed if user
had chosen to use RS 232 during Set Up Mode.
If user press and hold
key in order to exit
the reading Mode, program will confirm if can end the
report and print the final results thru RS 232.
<ESCAPE>
Indicates when the
Bargraph was not chosen
during Set Up Mode.