![background image](http://html1.mh-extra.com/html/omega/os101/os101_user-manual_4122676008.webp)
OS100 Series - Installation
2
The following describes the ordering information:
OS102 or OS101 - MA - *
, **, where
The following optional accessories are available:
Here are the Features of OS101 and OS102 infrared transmitters:
2.2
Electrical Connection
Sensor Head Cable
- The Sensor head is pre-wired to a 1.8 m (6 feet)
shielded cable. Plug & lock-in the male connector to the mating female
connector on the aluminum housing.
Power & Output Connection
- Open the cover of the main aluminum
housing. Slide the cable through the strain relief and connect the wires to
the terminal block on the board as shown in Fig. 2-1. For Alarm output
connection, refer to Fig. 2-2.
2-1
Model No.
Description
OS100-MB
Mounting Bracket
OS100-DR
DIN Rail Mounting adapter
OS100-WC
Water Cooling jacket
OS100-AP
Air purge collar
OS100-LS
Laser Sighting
OS100-CA15FT
Sensor Head Extension Cable (4.6 m, 15")
OS100-CA25FT
Sensor Head Extension Cable (7.6 m, 25')
TX8-100
8 Conductor stranded Shielded cable (30 m, 100')
PSU-93
Unregulated 16-24 VDC Power Supply
CAL3-IR
NIST Traceable Calibration
Features
OS101
OS102
Accuracy
2% Rdg or 4°F (2.2°C)
Temp Range
0-1000°F (-18 to 538°C)
Emissivity
0.1 to 0.99 Adj.
Field of View
6 to 1
Alarm Output
Standard
1mV/Deg. Output
Standard
4-20mA Output
Standard
0/5 VDC Output
Standard
K Type T/C
Std.
––
LED Display
––
Std.
Main Housing
65.5 x 30.5 x 115.3 mm
65.5 x 55.9 x 115.3 mm
(2.58" x 1.2" x 4.54")
2.58" x 2.2" x 4.54"
MA - 4/20 mA output
V1 - 0 to 5 VDC output
K - Thermocouple output, K type
MV - Millivolt output
C - 1 mV/°C output
F - 1 mV/°F output
HT- High
temperature
sensor head
Summary of Contents for OS101
Page 6: ...NOTES OS100 Series iv ...
Page 21: ...NOTES OS100 Series 6 3 ...
Page 22: ...NOTES OS100 Series 6 4 ...