1. Introduction
The OME-PIO-D56/OME-OME-PIO-D24 provides 56/24 TTL digital I/O lines.
The OME-PIO-D56/OME-OME-PIO-D24 consists of one 24-bit bi-directional port,
one 16-bit input port and one 16-bit output port (only for OME-PIO-D56). The 24-bit
port supports three 8-bit groups PA, PB & PC. Each 8-bit group can be individually
configured to function as either an input or an output. All groups using 24-bit bi-
directional ports are configured as inputs upon power-up or reset.
Use the OME-DB-24PD to connect the input port for either isolation purposes,
or to interface to the output port for relay control. The OME-PIO-D56/OME-PIO-D24
has one D-sub connector and two 20-pin flat-cable connectors (only for OME-PIO-
D56). The flat cable can be connected to an OME-ADP-20/PCI adapter. The adapter
can be fixed on the chassis. It can be installed in a 5V PCI bus and supports “Plug &
Play”.
1.1 Features
•
PCI bus
•
Up to 56/24(OME-PIO-D56/OME-PIO-D24) channels of digital I/O
•
All I/O lines buffered on the board
•
Eight-bit groups independently selectable for I/O on 24-bit port
•
Input / Output programmable I/O ports under software control
•
Double side SMD, short card.
•
Connects directly to OME-DB-24PR, OME-DB-24PD, OME-DB-24RD,
OME-DB-24PRD, OME-DB-16P8R, OME-DB-24POR, OME-DB-24SSR or
OME-DB-24C
•
4 interrupt sources: PC0, PC1, PC2, PC3
•
One DB37 connector, two 20-pin flat-cable connectors (only for OME-PIO-D56)
•
High drive capability
•
Automatically detected by Windows 95/98/2000/XP
•
No base address or IRQ switches to set
OME-PIO-D56/OME-PIO-D24 User Manual (Ver.2.1, Oct/2003)
---- 3
