4
inspect and service the unit as
necessary.
8
Do not open the unit if gas, water
and electrical is not disconnected.
Severe burns, scalding or even death
can occur if the unit is not cold to
touch before opening.
9
If any repairs where attempted by an
untrained personal, the warranty is
void.
10
Do not reverse gas with water pipes.
Severe damages to the unit, other
appliances on the house and your Gas
line system will occur.
11
Do not reverse cold and hot water
pipes. Severe damages to the unit will
occur and warranty will be void
12
Follow the diagrams bellow when
you install your OME 514-PV water
heater.
Operation
OME 514-PV is a instantaneous, tankless
water heater designed to efficiently supply
domestic hot water.
We combine the principle, which is been
around from the beginning of the 1900’ with
today technical know how, and we ad every
safety we could think about to give you the
ultimate in domestic water heating.
When you open the hot water faucet, the
computer sensors detect the depressurization
of the line and command the gas valve and
the ignition relay control the commencing of
the burning cycle.
A minimum of 0.5 Gallons per minute is
required to ignite, but only 0.4 gallons per
minute to maintain the burners on.
During the operation, the computer monitors
and adjusts the temperature and flow of the
water and gas, to insure the total burning of
your fuel.
As long as your gas, water and unit is on, just
by opening of your faucet you will have an
endless supply of hot water.
-To turn your water heater on, just open
your faucet.
-To turn your water heater off, just close
your faucet.
Temperature
The output temperature of the OME 514-PV
is been preset by the factory
NOT TO EXCEED 120 F
This is controlled by the computer and
Temperature limiters sensors and can not be
adjusted higher by any technician.
WARNING
Temperature over 120 F (50 C) can cause
severe burns or even death. The Disabled,
elderly and children’s are at a high risk of
being injured by high temperature of water.
