![background image](http://html1.mh-extra.com/html/omega/omb-daqboard-500-series/omb-daqboard-500-series_user-manual_3929163040.webp)
Note: Specifications subject to change without notice.
6-2 Specifications
947294
DaqBoard/500
Series
Signal to Noise
and Distortion:
S/(N+D) 73 dB min. @ gain = 1
Total Harmonic
Distortion:
80 dB (typical) @ gain = 1, measured to 5th harmonic
Full Power
Bandwidth:
1 MHz
Input Impedance
Shunt Res. to
Ground:
10 M ohm
Shunt
Capacitance:
28 pf
Overvoltage
Protection:
±25 V
Acceptable
Operating Limit:
Signal Plus Common Mode: ±12 V
Gain/Channel
Selection:
176 element
Analog Input Triggering/Clocking
Clock Sources:
o
on-board programmable pacer
o
user defined external TTL
External Clock
Input Latency:
o
5us max
Trigger Sources
Stop Sources
o
software command
o
External (TTL)
o
software Analog as follows:
•
above level
•
below level
•
rising above level
•
falling below level
•
inside window
•
outside window
o
software command
o
software Analog as follows:
•
above level
•
below level
•
rising above level
•
falling below level
•
inside window
•
outside window
•
scan count
External TTL
Trigger Latency:
5us max
Software Analog
Trigger Latency
One scan period max