![background image](http://html1.mh-extra.com/html/omega/omb-daqboard-500-series/omb-daqboard-500-series_user-manual_3929163013.webp)
Introduction 1
The
DaqBoard/500
and
DaqBoard/505
have 16 single-ended or 8 differential analog inputs multiplexed
to a 16-bit A/D converter with maximum throughput of 200 kHz, programmable gains of 1, 2, 4 or 8, one
counter input channel, two timer output channels, and 24 lines of digital I/O. In addition,
DaqBoard/500
includes two clocked DACs.
The boards feature a DMA engine for optimum performance in supported Windows environments. Board
connections are terminated in a 68-pin “high density” SCSI III connector at the rear of the PC.
A digital calibration method is used for both analog-to-digital and digital-to-analog
conversions. Please contact the factory should you believe your board to be in need
of calibration.
Basic Information
Analog Inputs
16 Single-Ended or 8 Differential
Ranges
Unipolar
0 to10V
0 to 5V
0 to 2.5V
0 to 1.25V
Bipolar
± 10V
± 5V
± 2.5V
± 1.25V
Resolution
16-bit
A/D Sample Rate
200 kHz
Gains (Programmable)
x1, x2, x4, x8
D/A Outputs (16-Bit)
*
2 Clocked DACs (DaqBoard/500 only)
Digital I/O
24
Counters (16-Bit)
1
Timers
2
Associated Terminal Board
TB-100 (optional)
Associated Cables
CA-G55:
CA-G56:
CA-G56-6:
68 Pin SCSI III Cable, 3 ft.
68 Pin SCSI III Cable, Shielded, 3 ft.
68 Pin SCSI III Cable, Shielded, 6 ft.
*
D/A Outputs do not apply to DaqBoard/505.
DaqBoard/500 Series
947294
Introduction 1-1