![background image](http://html1.mh-extra.com/html/omega/om-daqlink-temp/om-daqlink-temp_user-manual_3966218064.webp)
57
5.13.
Viewing Online Data
You can view the data from any of your loggers in real-time, as the data is being recorded and
transmitted to the PC. OM-DAQLINK loggers must be connected via USB cable to the
DataSuite software to enable online data view.
While the logger is running double click the Logger icon in the Map View.
While the logger is running open the logger context menu and select
Display Data
.
Figure 30:
Online data window
The data displayed in this window is the data that was transmitted by the logger in the current
software session. Data transmitted during a previous session of the software being open will not
be displayed. For example, when you setup the logger it creates a new online session. This
data can be viewed by opening archived data. Refer to section
5.12.
You may view the data in a graph or table by clicking the relevant tabs in the online data
window. While in either or these views, the data is constantly being updated in real-time in the
respective view according to the transmission rate of the logger.
Note:
Users of Windows 7 using right to left language settings e.g. Hebrew, may have problems
viewing the Date/Time in the DataSuite graph. This is a know Microsoft ® bug. Until a bug fix is
released, change the Regional Settings to English.
5.13.1.
Showing/Hiding the Data Sets
In the online graph display, where you have data from only one logger displayed, you can show
or hide the individual sensor data by using the sensor labels at the bottom of the graph.