Product Notes
LEDs
- Green LED blinks: 10 seconds to indicate logging and 15 seconds to indicate delay start mode
- Red LED blinks: 10 seconds to indicate low battery and/or memory and 1 second to indicate an alarm
condition
Password Protection
An optional password may be programmed into the device to restrict access to configuration options. Data
may be read out without the password.
Multiple Start/Stop Mode Activation
To start device: Press and hold the pushbutton for 5 seconds, the green
LED will flash during this time.
The device has started logging.
To stop the device: Press and hold the pushbutton for 5 seconds, the red LED will flash during this time. The device
has stopped logging.
Alarm
Programmable high and low limits; alarm is activated when temperature reaches or exceeds set limits.
Device Maintenance
Battery Replacement
Materials:
Small Phillips Head Screwdriver
OM-CP-BAT105 Battery
Procedure:
- Puncture the center of the back label with the screw driver and unscrew the enclosure.
- Remove the battery by pulling it perpendicular to the board.
- Insert the new battery into the terminals and verify it is secure.
- Screw the enclosure back together securely.
Installation Guide
Installing the Interface cable
- OM-CP-IFC200:
Insert the device into a USB port. The drivers will install automatically.
Installing the software
Insert the Software CD in the CD Drive. If the autorun does not appear, locate the drive on the computer and
double click
Autorun.exe
. Follow the instructions in the Wizard.
OM-CP-RHTEMP101A
