![background image](http://html1.mh-extra.com/html/microstrain/wsda-eth/wsda-eth_quick-start-manual_1789215001.webp)
Quick Start Guide
WSDA
®
-ETH
Wireless Sensor Data Aggregator with Ethernet Interface
Version
•
WSDA
®
-ETH firmware 2.0.17 and higher
•
Node Commander
®
software 2.2.3 and higher
•
Live Connect software 1.0.5 and higher
Starter Kit
•
1 WSDA
®
-ETH (Wireless Sensor Data Aggregator with an Ethernet interface)
•
1 2.4 GHz whip antenna
•
1 9VDC power supply
•
4 universal plug adapters
•
1 WSDA
®
access card
•
1 documentation CD containing the Live Connect and Node Commander
®
software.(Windows
®
XP, Vista, 7)
•
1 Ethernet cable (6 feet long)
Software Installation
•
Insert the software CD into your CD-ROM drive and follow the on-screen instructions to
install the software.
Hardware Installation
1.
Install the antenna by hand on the RF connector on the back of the WSDA
®
. Do not
over-tighten.
2.
Install the Ethernet cable into the Ethernet port on the back of the WSDA
®
and into the
LAN.
3.
Attach the appropriate plug adapter to the power supply.
4.
Connect the power supply to the power connector on the back of the WSDA
®
and to the
local power source.
1