background image

 

IMPORTANT SAFETY INSTRUCTIONS 

 

IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully 

before removing the contents of this carton. 

1.

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack 
of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a 

person responsible for their safety.  Children should be supervised to ensure that they do not play with the appliance.   

2.

 

After removing the packaging, make sure to check if there is any damage to the appliance. If there is any damage, never attempt 

to use the appliance and immediately contact your Authorised Service Centre.  As packaging materials can be dangerous to 
children, they need to be collected immediately and put out of reach. 

3.

 

In certain circumstances electrical appliances may be a danger hazard.  Check the conformity of voltage and power settings, 

which are specified on the information plate attached to the appliance and/or packaging, with the usage conditions available. 

4.

 

Do not place heavy objects in or on these appliances, use for storage or as a cutting surface as sharp edges can damage the 

surface.  This appliance is designed for cooking food only.  Use flat based, stable, inductive cooking rated cooking vessels only. 

5.

 

This appliance is designed for domestic household use only and for the cooking of domestic food products.  Use as a commercial 

appliance will void the warranty. It should not to be used in a marine environment or outdoors and must be fully built in.  Do not use 
the appliances until fully installed. 

6.

 

A means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. 

7.

 

The electrical connection must be accessible after installation. The appliance must be electrically isolated before any maintenance can 
be performed. 

8.

 

The appliance is not intended to be operated by means of an external timer or separate remote control system. 

9.

 

Electrical connection must be made as per local wiring rules and regulations.  Do not disconnect the appliance with wet hands or 
bare feet, and do not disconnect the power cord with extreme force.  

10.

 

Ensure that the kitchen is well ventilated or mechanical ventilation is in use while cooking on this appliance.  

11.

 

Do not store or use flammable materials or aerosols near the cooktop.  Items made from aluminium, plastic, plastic film & sugar 
based foods should also be kept away from the appliance, as they may fuse to the surface. 

12.

 

WARNING – The surface temperature of this appliance exceeds 95°C.  To avoid a hazard, under bench access must be restricted.  A 
board must be installed underneath the cooktop. Heat from the underside of the unit will be expelled by inbuilt fans – do not block. 

13.

 

WARNING - The cooktop will become hot during and directly after use.  Do not touch the surface during this time, as it may be hot 

and can cause burns.  To avoid burns, children should be kept away.   

14.

 

Cleaning may only be commenced on the appliance once it has cooled down and is turned off.  Failure to clean properly can damage 

the unit.  Do not use a steam jet or any other high pressure cleaning equipment to clean the appliance.  

15.

 

When the appliance is not being used, turn the appliance off. 

16.

 

Where this appliance is installed in a caravan, it shall NOT be used as a space heater. 

17.

 

Do not modify this appliance.  

18.

 

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass surface as they can scratch the surface, which may 
result in the glass shattering.  Clean the glass using a warm damp cloth (e.g. dishcloth) and dry it with a soft dry tea towel. 

19.

 

All cabinetry and materials used in the installation must be able to withstand a minimum temperature of 80°C whilst in use. Certain 

types of vinyl or laminate kitchen furniture are particularly prone to heat damage or discolouration at temperatures below the 
guidelines given above. Any damage caused by the appliance being installed without adhering to the temperature limits set out above 
will be the liability of the owner.  To avoid any hazards, limit access to the under-bench section of the cooktop.  

20.

 

The appliance must be installed and put into operation by an authorised under the conditions provided by the manufacturer in this 

manual. The manufacturer cannot be held responsible for any damage that might occur due to faulty installation. 

21.

 

Damage can occur to bench tops if pots and pans are allowed to overlap the bench top.  This can result in heat being transferred to 

the bench top.  Ensure that correct sized pots & pans are used.  Pans should be lifted on and off the cooktop surface and not 
dragged.  Cooking zones should not be switched on without cookware placed on it. Do not place empty cookware onto the cooking 

zones when in use. 

22.

 

If any cracking is noticed on the cooktop, turn the appliance off immediately and call your Authorised Service Centre. 

23.

 

Do not leave the cooktop while cooking with solid or liquid oils.  There may be flaming up in conditions of extreme heating.  Never 

pour water onto the flames occurring from oil.  Immediately turn the cooktop off and cover the pan with a lid or fire blanket in order to 
smother the flame. 

24.

 

Users with pacemakers should keep their upper body at least 30cm away from any operational inductive cooking zone. If in doubt, 

please consult your doctor before use. 

25.

 

Do not place metal objects such as spoons or pan lids onto the cooktop as they may become hot or cause damage to the surface. 

26.

 

A small amount of noise will sometimes be heard as elements turn on & off during operation. This is normal & not a fault. 

27.  Damage can occur to bench tops if pots and pans are allowed to overlap the bench top. This can result in heat being transferred   

       to the bench top. Ensure that correct sized pots & pans are used. Pans should be lifted on and off the cooktop surface and not   
      dragged. Cooking zones should not be switched on without cookware placed on it. Do not place empty cookware onto the  
      cooking zones when in use. 

28.  Do not leave the cooktop unattended while cooking with solid or liquid oils. There may be flaming up in conditions of extreme   
       heating. Never pour water onto the flames occurring from oil. Immediately turn the cooktop off and cover the pan with a lid or fire   

       blanket in order to smother the flame. 

Summary of Contents for OI64MZ













Reviews: