Omega OG92XA, Installation And Operating Instructions Manual

Page: 8 / 12

8
use of electrical plates - Vitroceramic Heating elements
commutator energy heat cooking methods
regulator intensity
1 1 - 2 slight melting of fats etc.; heat small quantities of liquid
2 3 - 4 mild heating of medium quantities of liquid; puddings, long-cooking sauces
3 5 - 6 slow defreezing - heat large quantities of liquid; cooking below
boiling temperature
4 7 - 8 medium tender roasts; cooking at boiling temperature
5 9 - 10 high roasts - boiled food; pan-frying of meats
6 10 - 11 burning heat bring large quantities of liquid to boil; fry
Fig. 5
WARNING
:
CRYSTAL HOBS
DO NOT TIGHTEN SCREW
‘A’
EXCESSIVELY
,
ONE TURN MAX WILL BE SUFFICIENT
,
AFTER CORRECTLY FITTING SHAFT
‘B’
INTO PLACE
,
AS SHOWN
IN THE PICTURE
.
ENSURE THAT THE SUPPORTING SURFACE IS PERFECTLY EVEN
.
FIT THE APPROPRIATE EXPANDED SEAL
.
CRYSTAL HOBS MUST
NOT BE SUBJECTED TO STRAINS CAUSED BY UNEVEN SUPPORTING SURFACES
.