15
Operating Instructions
Using Gas Burners
The flame cut-off safety device (FFD); operates instantly when the safety mechanism
activates due to overflown liquid over the upper hobs.
1.
The valves controlling the gas cookers have a special security mechanism.
To light the cooker, hold down the switch and turn it counterclockwise. All of the lighters will
operate and the cooker you are controlling will light. Keep the switch pressed until the cooker
ignites.
2.
Do not continuously operate the igniter for more than 15 seconds. If the burner does not ignite,
wait a minimum of one minute before trying again.
3.
In models with the gas security system, when the flame of the cooker is extinguished, a control
valve cuts off the gas automatically. To operate the burners with the gas security system you
must press the knob and turn counter-clock-wise. After the ignition you must wait approximately
5-10 seconds for the gas security system to activate. If the burner is extinguished for any
reason, close the gas control valve and wait a minimum of one minute before trying again.
4.
Before operating your hob please make sure that the burner caps are well positioned. The right
placement of the burner caps are shown below.
Figure 13
Figure 14
