11
Installation Instructions
Attaching the Feet
1.
Screw the feet into the bottom four corners of the oven.
2.
You can balance your oven by turning the screwed feet according to the surface type you are
using.
Figure 7
Figure 8
Figure 9
Chain Lashing Illustration
Before using the appliance, in order to ensure safe use, be sure to fix the appliance to the wall using the
chain and hooked screw supplied. Ensure that the hook is screwed into the wall securely.
Test the operation of the cooker before leaving
Note: These burners have no aeration adjustment.
Check correct operation of the ignitions system and operation of the regulator and operation of the burners
individually and in combination. Burner flames should be clear blue, with no yellow tipping. If the burners
show any abnormality check that the burners are correctly located. If satisfactory performance cannot be
obtained, contact Omega service.
Check the gas pressure at the test point (refer to the rating plate for specified pressure) with the Wok
burner set on the highest position.
Important
Before leaving, affix the spare rating plate provided in a position that is accessible when the appliance is in
the installed position and provide the customer with a copy of this manual for reference.
