![background image](http://html1.mh-extra.com/html/omega/odo684xb/odo684xb_instruction-manual_4045066007.webp)
6
Installation Instructions
The adjacent furniture must be able to withstand a minimum temperature rise of 100°C above
the ambient temperature of the room it is located in, during periods of use. The power supply to
the appliance must be cut off before any adjustments or maintenance work is done on it.
PREPARATION FOR INSTALLATION AND USE
Manufactured with best quality parts and materials, this modern, functional and practical oven will meet
your needs in all respects. Make sure to read the manual to obtain successful results so as not to
experience any problems in the future. The information given below contains rules that are necessary for
correct positioning and service operations. They should be read without fail, especially by the technician
who will position the appliance.
CHOOSING A PLACE FOR THE APPLIANCES
There are several points to pay attention to when choosing a place for your oven. Make sure to take into
account our recommendations below in order to prevent any problems and dangerous situations, which
might occur later!
When choosing a place for the oven, attention should be paid that there are no flammable or combustible
materials in the close vicinity, such as curtains, oil, cloth etc. which quickly catch fire.
Furniture surrounding the oven or cooktop must be made of materials resistant to temperatures above 100
C°. Required changes to wall cabinets and exhaust fans above a built-in cooktop as well as minimum
heights from the oven board are shown in Figure 1. Accordingly, the exhaust fan should be at a minimum
height of 65 cm from the cooktop. If there is no exhaust fan the height should not be less than 70 cm.
Note: The appliance must not be installed behind a decorative door in order to avoid overheating.
7
Installation Instructions
Insert the oven into cabinet partly by pushing it forward. Open the oven door and insert 2 screws into the
holes on the oven frame. While the product frame touches the wooden surface of the cabinet, tighten the
screws. If installed under a cooktop, there must be at least 50mm between the two appliances, and the
distance between the worktop and the top of the control panel must be a minimum of 25mm.
The dimensions and material of the cabinet in which the oven will be installed must be correct and resistant
to increases in temperature. In a correct installation, contact with electrical or insulated parts must be
prevented. Insulating parts need to be
fi
tted in a way to ensure that they cannot be removed by using any
kind of tool.
Installing the appliance in the close vicinity of a refrigerator or a deep-freezer is not recommended as the
performance of the above-mentioned appliances will be negatively a
ff
ected due to emanating heat. After
removing your oven from its packaging, be sure that the oven is not damaged. If you suspect any damage
to the appliance, do not use it; immediately contact an authorized Service Centre.