4
Important Safety Warnings
IMPORTANT: Read the assembly instructions and safety precautions of this booklet carefully before removing the contents of the
carton.
1.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance.
2.
In certain circumstances electrical appliances may be a danger hazard.
3.
Do not place heavy objects in or on these appliances, or use for storage, or let children play or swing from the door.
These appliances are designed for cooking food only.
4.
This appliance is designed for domestic household use only and for the cooking of domestic food products. Use as a
commercial appliance will void the warranty. It should not to be used in a marine environment or outdoors.
5.
If the electrical supply cord is damaged, either when being installed or after installation, it must be replaced by the
manufacturer, its service center or similarly qualified persons in order to prevent a hazard.
6.
The electrical connection must be accessible after installation. The appliance must be electrically isolated before any
maintenance can be performed, which includes changing a lamp.
7.
Electrical connection must be made as per local wiring rules and regulations. Do not disconnect the appliance with
wet hands or bare feet, and do not disconnect the power cord with extreme force.
8.
Always grasp the oven door in the center of the handle as the areas around the door edges may be hot due to the
escape of hot air.
9.
Ensure that the kitchen is well ventilated or mechanical ventilation is in use while cooking in this appliance.
10.
Do not store or use flammable materials or aerosols near the oven. Items made from aluminium, plastic or plastic film
should also be kept away from the appliance, as they may fuse to the surface.
11.
Never line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise the
cooking and even damage the enamel.
12.
WARNING - The oven will become hot during and directly after use. Do not touch any components during this time, as
they may be hot and can cause burns. Do not touch the heating elements inside the oven to avoid burns. Young
children should be kept away. Use heat resistant cooking gloves where-ever possible when moving food and cooking
utensils in and out of the oven.
13.
Cleaning may only be commenced on the appliance once it has cooled down (best slightly warm). The appliance
should be disconnected from the power outlet or turned off at your isolation switch before commencing any cleaning
process. Do not use a steam jet or any other high pressure cleaning equipment to clean the appliance. Follow oven
cleaner directions if these are being used.
14.
Wash all accessories in hot soapy water or in a dishwasher, wipe dry with a paper or cloth towel. If you use your oven
for an extended period of time, condensation may form. Dry it using a soft dry cloth.
15.
When the appliance is not being used, the knobs must be kept in the ‘OFF ‘position.
16.
Where this appliance is installed in a caravan, it shall NOT be used as a space heater.
17.
Do not modify this appliance.
18.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass as it can scratch the
surface, which may result in the glass shattering. Clean the glass door using warm damp cloth and dry it with a soft
cloth.
19.
All cabinetry and materials used in the installation must be able to withstand a minimum temperature of 50°C above
the ambient temperature of the room it is located in, whilst in use. Certain types of vinyl or laminate kitchen furniture
are particularly prone to heat damage or discolouration at temperatures outside the guidelines given above. Any
damage caused by the appliance being installed without adhering to the temperature limits set out above will be the
liability of the owner.
20.
This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the manufacturer’s
instructions. Please see the specific section of this booklet that refers to installation.
21.
The appliance must be installed and put in operation by an authorized technician under the conditions provided by the
manufacturer in this manual. The manufacturer cannot be held responsible for any damage that might occur due to
faulty installation.
22.
The values indicated on the printed documents found on the product are values obtained in laboratory environment
according to relevant standards. These values may vary according to the usage and environment conditions of
product.
23.
WARNING – Ensure that the appliance is switch off before replacing the lamp to avoid the possibility of electric shock.
DO NOT OPERATE THIS APPLIANCE BEFORE READING THE INSTRUCTION BOOKLET
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE
DO NOT STORE CHEMICALS OR FLAMMABLE MATERIALS OR SPRAY AEROSOLS NEAR THIS
APPLIANCE
5
Appliance Details
Electrical Details
Model
ODO684X
Rated Voltage
220-240V ~50Hz
Rated Power Input
4360-5190W
Dimensions
DEPTH (mm)
WIDTH (mm)
HEIGHT (mm)
546
595
888
Electrical Connections
LOCAL AUTHORITY REQUIREMENTS
Installation is only permitted by a licensed electrician, and carried out according to instructions
provided by the manufacturer. Incorrect installation might cause harm and damage which the
manufacturer accepts no responsibility.
ELECTRICAL INSTALLATION FOR THE LICENSED ELECTRICIAN
This oven must be connected to a 220-240V 50Hz power supply. It is earthed via the cord.
Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the
appliance identification plate) must be checked for correspondence to the available mains supply voltage,
and the mains electric wiring should be suitable for the oven’s power rating (also indicated on the appliance
identification plate);
The switched outlet must be connected to a suitable earth wiring, in conformity to current safety regulations.
It should not be located above the appliance and no more than 1.25m away from it. The power supply cord
must not touch against any hot surfaces and must be placed so that its temperature does not exceed 75°C
at any point along its length. Means for disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
After having installed the appliance, the switched outlet must always be in an accessible position.
NOTE: For connections to the mains power supply, never use adapters, reductions or multiple power points
as these may overheat and catch fire. A circuit breaker with a contact opening of at least 3mm must be
installed inside the supply circuit.
The mains terminal block is located on the back of the oven and the terminals are accessible by opening
the terminal block cover.
NOTE: The terminal cover should not be opened when the mains power is still connected to the appliance
and never by an unauthorized person.
The electrical safety of this appliance can only be guaranteed if the oven is correctly and efficiently earthed.
The manufacturer declines all responsibility for damage resulting from an installation which has not been
earthed correctly.
