background image

MODEL:  OCG755FX

We ask that you carefully read the instructions within this booklet to enable you to abtain quality results from the outset.
The appliance must be installed only by an authorised person in compliance with the instructions provided. The manufacturer declines
all responsibility for improper installation which may harm persons and animals and damage property.
The appliance must be used for the purpose for which it was expressly designed. Any other use (eg heating rooms) is considered to be
improper and consequently dangerous. The manufacturer declines all responsibility for damage resulting from improper and
irresponsible use.
The manufacturer shall not be held responsible for any inaccuracies in this handbook due to printing or transcription errors. The
designs in the figures are purely indicative.
The manufacturer also reserves the right to make any modifications to the products as may be considered necessary, useful or in the
interests of the user, without jeopardizing the main functional and safety features on the products themselves.
If your cooktop requires service, please contact the Omega  customer service centre.

COD. 04077NA - 27.10.2017

Dear Customer
Thank you for purchasing a Omega Cooktop.
You will find that the clean lines and modern look of your Omega Cooktop blends perfectly with your kitchen décor.
It is easy to use and performs to a high standard.
Omega also makes a range of products that will enhance your kitchen such as ovens, rangehoods, dishwashers,
microwaves, sinks and taps.
There are models to complement your new Omega Cooktop. 
Of course we make every effort to ensure that our products meet all your requirements, and our Customer
Relations department is at your disposal, to answer your questions and to listen to all your suggestions (see back
cover of manual).
Please complete the warranty section of this manual and keep your receipt as proof of purchase. Retain all
documents relating to the purchase of this products.
Omega is committed to providing increasingly efficient products that are easy to use, respect the environment and
are attractive and reliable.

OMEGA

USE, INSTALLATION AND MAINTENANCE

INSTRUCTIONS FOR BUILT-IN HOT PLATES

PLEASE READ THIS MANUAL BEFORE

INSTALLING THE HOTPLATE.

Summary of Contents for OCG755FX

















Reviews: