17
16
Empty the water container
1.Open the filter cover.
2.Unscrew both locking levers towardas each other.
3.Clean the filter base completely.
4.Re-insert the filter base!
5.Screw both locking levers.
6.Close the filter cover flap until it locks into position.
1.Open the door.
2.Take out the filter door.
3.Clean the filter door; wipe off the scrap threads
4.Reinstall the filter door.
which will cause the extension of drying time and energy consumption;
1.The fluff accumulated on the filter will block the air circulation,
2.Do disconnect the power cord before cleaning!
3.Do not operate the dryer without the filter!
4.Clean the filter after each use to prevent lint accumulation inside the dryer.
NOTE!
Clean filter base
accumulated on the filter door.
1. Hold and pull out the water container
with two hands;
2. Tilt the water container, pour out the
condensed water into basin;
3. Install the
WARNING:
1.
2.Do not drink the condensed water
.
water container.
Empty the water container after each use, the programme will be paused and the “ ”
icon will flash if the water container is full during the drying process. After the container
emptyed, the dryer can be restarted by pressing
【
Start/Pause
】
button.
3.Do not use the dryer without the water container
Clean the filter door
As necessary, approx. once every 2 months, remove the fluff from
the heat exchanger using the sponge or soft brush.
When doing this, please use gloves.
Note: The fluff can be removed more easily if it is first
dampened e. g. with a laundry dampener.
Clean heat exchanger
Filter door
Locking lever
Filter cover
Filter base
Cleaning and routine maintenance
Malfunction display and solutions and Precautions
Malfunction display and solutions
“
”
E32
“
”
E33
Empty
container
Dispiay
Reason
Solutions
Container is full
Water pump failure or water
level sensor failure
P
lease contact your
local service center
if the problem
persists
Humidity sensor failure
Temperature sensor failure
“ ”is on
Precautions
Only authorised technicans can carry out repairs.
Before you call customer service, please check if you have deal with the fault by yourself
Check if the clothes is over load .
Problem
Solution
Display does not
light up
Check if the main plug is inserted.
Check if the programme is selected.
Check the main power supply.
Dryer does not start
Check if the start button is pushed.
Check if the door is entirely closed.
Door is open by itself
Press door until it “clicks”into position.
Degree of dryness is not
reached or drying time too
long
If you cannot deal with the faulty by yourself and need help:
or if you have follow the user instructions.
A technician will charge you for advice, even during the warranty period.
1.Press the key
【
On/Off
】
.
2.Pull out
the mains plug and call the service.
Use the appropriate programme.
Clean the filter door and filter base.
keep the Air inlet clear.
