Omega OCD7C, Owner'S Manual

Page: 6 / 13

9 10
OPERATIONS
After Drying
Drying
Buzzer beep or
" :
00
"
on display
.
0
1 2 3 4 5
open the door and
take out laundry pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using , please make sure it ' s installed properly .
Note!
1
plug in
2
load
3
close door
start
on
select program select function
or default
• If use the socket with a switch, please press the switch to turn off the power
directly.
Note!
Never overload
.
• Not for textile with dropping water. The dryer could be damaged, even fire.
• Not suitable for silk or woolen textiles.
•
1.Before drying, thoroughly spin the laundry in washing machine. High spin speed can
the drying time and save energy consumption.
2.For uniform drying result, sort the laundry according to fabric type and drying programme.
3.Before drying, please close zips, hooks and eyelets, button up, tie fabric belts, etc.
4.Do not over dry the clothes, because over dried clothes can easily get creases.
5.Do not dry the articles containing rubber or similar elastic materials.
6.The door can be opened only after the programme of the drying machine finishes to
from being scalded by hot steam or over heated drying machine.
7.Clean the lint filter and empty container after each use to avoid extension of drying time
and energy consumption.
8.Do not dry these clothes after dry-clean process.
reduce
prevent human skin
The reference weight of dry clothes (each)
Mixed-fabric clothes
(about 800g) Jacket
(about 800g cotton) Jeans
(about 800g) Towel quilt
(about 900g cotton)
Single bedsheet
(about 600g cotton)
Short sleeve shirt
(about 180g cotton)
Work clothes
(about 1120g)
Short pants
(about 70g cotton)
Sleepwear
(about 200g)
Socks
(about 50g
mixed-weave)
Long sleeve shirt
(about 300g cotton)
Note!
Before Each Drying
Attention!
Before the first cycle, the dust and grease may remain in this dryer during the
period of manufacture and transportation, to avoid contaminating your clothes,
please follow these steps:
• Put some clean rags into the drum.
• Plug the power.
• Select the “Quick” Programme, press “Start/Pause” button.
• After finishing this programme, please follow the “cleaning and routine
maintenance” to clean the lint filter and air condenser on page 14.
OPERATIONS