Omega OCD7C, Owner'S Manual

Page: 8 / 13

OPERATIONS OPERATIONS
13 14
Speed dry indicator
Programme selector
Other Functions
1.The drum will stop running after the programme ends,
the display will show " ", last cycle phase status light will flash. The
dryer will start Anti-crease if user doesn’t remove the load in
1 minute (refer to page 13). Please press key to cut off power and
pull the plug out.
2.Deal with the problem accroding to “Malfunction display and solutions , if
there is a unexpected stop during the drying procedure and the dryer show
information(refer to page 16 ).
the buzzer will beep,
the
【 】
function
【
On / Off
】
”
The drum will keep rotating after the programme starts, the state light in the
display area will flash in sequence, the remaining time displayed will change
automatically.
1.Press the
【
On/Off
】
button ,when the LED display screen brightens up, rotate
the programme knob to select the desired programme.
2.Select the
【
Delay
】
,
【
Time
】
,
【
Intensity
】
,
【
Speed Dry
】
,
【
Signal
】
or
【
Anti-Crease
】
functions for additional option.
3.Press the
【
Start/Pause
】
button.
Programme start
Programme end
• Instructions of the
【
Delay
】
function
This function is used for delaying clothes drying time within 24 hours.
means the programme
time starts to decrease on the
Steps in details
1. Load your laundry and make sure the machine door is closed.
2. Press the
【
On/Off
】
button,then to turn the programme selector knob and select a
desired programme.
3. You can select the
【
Anti-Crease
】
or
【
Signal
】
functions according to your need.
4. To press the
【
Delay
】
key.
5. Continue to press the
【
Delay
】
to select the delay time.
6. After the
【
Start/Pause
】
button is pushed, the dryer is at the run condition. The
drying procedure will be automatically performed when the delay time is over.
7. If you push the
【
Start/Pause
】
button again, the delay function will be paused.
8. If you want to cancel the “Delay” function, please press the
【
On/Off
】
button.
The delay time
will start after x hours. When the delay programme starts, the
display and the delay icon blinks.
Fliter
Please clean the filter when the“ ” is lighting, after the dryer stops.
Tank
Please empty the container when the“ ” is lighting, after the dryer stops.
On/Off
Product is switched on or off.
11
Start/Pause
the button to start or pause the
drying cycle.
Press
12
Specialty function
These buttons are used for setting
additional functions.
3
Display
This display shows the setting, estimated
remaining time and status messages of
your dryer.
4
Programmes
Different Dryer cycle can be selected
according to the user's needs to make the
clothes have more effective drying results.
5
Delay start
Child lock
Remaining Time indicator/Error message
Cycle phase status
Clean filters (warning)
Empty water container (warning)
Dryness level (four grades)
Signal indicator
Anti-crease mode
Time
My cycle