Omega OBO888B, Instruction Manual

Page: 17 / 24

13
Accessories
It is recommended that you use the containers indicated depending on the food you will cook in your oven.
You can also use glass containers, cake pans and special oven trays suitable for use in your oven
(available in kitchenware shops). Pay attention to the information given by the supplier for use of this
cookware. The information given below should be implemented for enameled containers.
If the food to be cooked does not completely cover the oven tray, if the food is taken out of the deep-freezer
or if the tray is used to collect the dripping juices of the foods during the grill operation, deformation might
be observed on the tray over time due to high temperatures forming during the cooking/baking operation.
This is a normal, physical state that results during the heat transfer. Do not leave a glass tray or container in
a cold environment immediately after cooking in them. Do not place them on cold and wet surfaces. Ensure
that they slowly cool off by placing them on a dry piece of cloth or wooden board, otherwise, the glass tray
or container might break. If you are going to use the large wire oven rack/grill, insert a tray into one of the
lower racks to collect fat or oil. To make cleaning easier, add some water into this tray. In a grilling
operation, use the shelf in one of the top positions.
Each wire grid comes with a built-in safety feature to help minimise them being accidentally pulled fully out.
This comes in the way of a “step”, positioned part-way in from the rear of the accessory.
To fit them into the oven, push the wire grid or tray part way into the oven until the step “catches”, then
angle the part over the step & fully insert. To remove, repeat the operation in reverse.
The Wire Grid for Deep Trays
Make sure the wire grid is correctly
placed within a deep tray. It is
recommended
to use this accessory for grilling
steaks, meatballs and similar food.
The Wire Grid
The wire grid is used to grill or to place
different cookware on it.
The Shallow Tray
The shallow tray is best used for
baking pastries.
Put the tray into any rack and push it to
the end to make sure it is correctly
placed.
The Deep Tray
The deep tray is used to cook stews.
Wire Rack with Easyfix Full Extension Telescopic
Rail
The telescopic rail extends out fully to allow easy
access to your food.
Telescopic Rails
Clean the accessories thoroughly with warm water,
detergent and a soft clean cloth on first use.
• Positioning of the telescopic rails on the wire rack
is secured with the fastening tabs on the
fasteners.
• Remove the side runner.
• On each telescopic rail there are top and bottom
fasteners that allows you to reposition the rails.
• Hang the telescopic rail top fasteners on the side
rack level reference wire and simultaneously
press the bottom fasteners until you clearly hear
the fasteners clip into the side rack level fixing
wire.
• In order to remove, hold the front surface of the
rail and follow the previous instructions in
reverse.
14
Accessories
The EasyFix Wire Rack
Clean the accessories thoroughly with warm water, detergent and a soft clean cloth on first use.
• Insert the accessory to the correct position inside the oven.
• Allow at least a 1 cm space between fan cover and accessories.
• Take care removing cookware and/or accessories out of the oven. Hot meals or accessories can
cause burns.
• The accessories may deform with heat. Once they have cooled down, they will recover their
original appearance and performance.
• Trays and wire grids can be positioned on any level from1 to 9.
• Telescopic rails can be positioned on levels T1, T2, T3, 4, 5, 6, 7, 8, 9.
• Level 3 is recommended for single level cooking.
• Level T2 is recommended for single level cooking with telescopic rails.
• Level 2 and Level 4 are recommended for double level cooking.
• Level T1 and Level T3 are recommended for double level cooking with telescopic rails.
****Accessories may vary depending on the model purchased.
Replacing the Oven Lamp
• The appliance must first be disconnected from the power outlet or turned off at your isolation
switch.
• Unscrew the glass cover attached to the lamp holder; anti-clockwise.
• Unscrew the lamp and replace it with another high-temperature lamp with the following
characteristics:
Type E14
Voltage Rating 220-240V
Power Rating 25W
Temperature Rating 300°
• Remount the glass cover and reconnect the appliance to the power supply
NOTE : Should you experience any difficulty please contact your nearest after-sales service centre.
16
Troubleshooting
If you still have a problem with your appliance after checking these basic troubleshooting steps,
please contact an authorised service person or qualified technician.
Problem Possible Cause Solution
Oven does not switch on. Power is switched off.
Check whether there is power supplied.
Also check that other kitchen appliances
are working.
No heat or oven does not warm
up.
Oven temperature control is
incorrectly set.
Oven door has been left open.
Check that the oven temperature control
knob is set correctly.
Oven light (if available) does not
operate.
Lamp has failed.
Electrical supply is disconnected
or switched off.
Replace lamp according to the
instructions.
Make sure the electrical supply is
switched on at wall socket outlet.
Cooking is uneven within the
oven.
Oven shelves are incorrectly
positioned.
Check that the recommended
temperatures and shelf positions are
being used.
Do not frequently open the door unless
you are cooking things that need to be
turned. If you open the door often, the
interior temperature will be lower and this
may affect the results of your cooking.
The timer buttons cannot be
pressed properly.
There is foreign matter caught
between the timer buttons.
Touch model: there is moisture
on the control panel.
The key lock function is set.
Remove the foreign matter and try again.
Remove the moisture and try again.
Check whether the key lock function is
set.
The oven fan (if available) is
noisy.
Oven shelves are vibrating.
Check that the oven is level.
Check that the shelves and any bake ware
are not vibrating or in contact with the
oven back panel.
The cooling fan continues to
operate after the oven is
switched off.
Electronically-controlled oven fan
automatically runs for a certain
amount of time to cool the oven.
The fan switches off automatically when
the electronic components have cooled
sufficiently.
The oven has switched itself off.
Electronically-controlled ovens
switch off automatically if no
function is in operation.
The oven will switch itself off automatically
to save energy if no other action is taken
within a certain time frame after switching
it on or after the end of a cooking
programme.
If the door is opened during a
fan-assisted function, the internal
fan will stop.
Electronically-controlled ovens
with a door switch will stop
cooking if the oven door is
opened.
It is a normal operation of the appliance,
useful when cooking foods in order to
avoid excessive heat escaping. When the
door is closed, the oven will restart to
normal operation.
14
16
Troubleshooting
If you still have a problem with your appliance after checking these basic troubleshooting steps,
please contact an authorised service person or qualified technician.
Problem Possible Cause Solution
Oven does not switch on. Power is switched off.
Check whether there is power supplied.
Also check that other kitchen appliances
are working.
No heat or oven does not warm
up.
Oven temperature control is
incorrectly set.
Oven door has been left open.
Check that the oven temperature control
knob is set correctly.
Oven light (if available) does not
operate.
Lamp has failed.
Electrical supply is disconnected
or switched off.
Replace lamp according to the
instructions.
Make sure the electrical supply is
switched on at wall socket outlet.
Cooking is uneven within the
oven.
Oven shelves are incorrectly
positioned.
Check that the recommended
temperatures and shelf positions are
being used.
Do not frequently open the door unless
you are cooking things that need to be
turned. If you open the door often, the
interior temperature will be lower and this
may affect the results of your cooking.
The timer buttons cannot be
pressed properly.
There is foreign matter caught
between the timer buttons.
Touch model: there is moisture
on the control panel.
The key lock function is set.
Remove the foreign matter and try again.
Remove the moisture and try again.
Check whether the key lock function is
set.
The oven fan (if available) is
noisy.
Oven shelves are vibrating.
Check that the oven is level.
Check that the shelves and any bake ware
are not vibrating or in contact with the
oven back panel.
The cooling fan continues to
operate after the oven is
switched off.
Electronically-controlled oven fan
automatically runs for a certain
amount of time to cool the oven.
The fan switches off automatically when
the electronic components have cooled
sufficiently.
The oven has switched itself off.
Electronically-controlled ovens
switch off automatically if no
function is in operation.
The oven will switch itself off automatically
to save energy if no other action is taken
within a certain time frame after switching
it on or after the end of a cooking
programme.
If the door is opened during a
fan-assisted function, the internal
fan will stop.
Electronically-controlled ovens
with a door switch will stop
cooking if the oven door is
opened.
It is a normal operation of the appliance,
useful when cooking foods in order to
avoid excessive heat escaping. When the
door is closed, the oven will restart to
normal operation.
16
Troubleshooting
If you still have a problem with your appliance after checking these basic troubleshooting steps,
please contact an authorised service person or qualified technician.
Problem Possible Cause Solution
Oven does not switch on. Power is switched off.
Check whether there is power supplied.
Also check that other kitchen appliances
are working.
No heat or oven does not warm
up.
Oven temperature control is
incorrectly set.
Oven door has been left open.
Check that the oven temperature control
knob is set correctly.
Oven light (if available) does not
operate.
Lamp has failed.
Electrical supply is disconnected
or switched off.
Replace lamp according to the
instructions.
Make sure the electrical supply is
switched on at wall socket outlet.
Cooking is uneven within the
oven.
Oven shelves are incorrectly
positioned.
Check that the recommended
temperatures and shelf positions are
being used.
Do not frequently open the door unless
you are cooking things that need to be
turned. If you open the door often, the
interior temperature will be lower and this
may affect the results of your cooking.
The timer buttons cannot be
pressed properly.
There is foreign matter caught
between the timer buttons.
Touch model: there is moisture
on the control panel.
The key lock function is set.
Remove the foreign matter and try again.
Remove the moisture and try again.
Check whether the key lock function is
set.
The oven fan (if available) is
noisy.
Oven shelves are vibrating.
Check that the oven is level.
Check that the shelves and any bake ware
are not vibrating or in contact with the
oven back panel.
The cooling fan continues to
operate after the oven is
switched off.
Electronically-controlled oven fan
automatically runs for a certain
amount of time to cool the oven.
The fan switches off automatically when
the electronic components have cooled
sufficiently.
The oven has switched itself off.
Electronically-controlled ovens
switch off automatically if no
function is in operation.
The oven will switch itself off automatically
to save energy if no other action is taken
within a certain time frame after switching
it on or after the end of a cooking
programme.
If the door is opened during a
fan-assisted function, the internal
fan will stop.
Electronically-controlled ovens
with a door switch will stop
cooking if the oven door is
opened.
It is a normal operation of the appliance,
useful when cooking foods in order to
avoid excessive heat escaping. When the
door is closed, the oven will restart to
normal operation.