33
EN
What
When
How
Whips
Every use
Inspect exposed wire mesh and for leaks. Replace all worn or dama-
ged hoses before starting the engine.
Hydraulic connectors
Every use
Inspect for cracks and leaks. Replace all damaged connections
before starting the engine.
Nuts and bolts
Every use
Check for loose screws
Beam
Every use
Apply grease to the beam surface.
Moving parts
Cada uso
Cleaning up waste
CAUTION
Residual hydraulic energy
The pressurised hydraulic fluid must release residual energy before carrying out any maintenance or repair work on the log
splitter. Hydraulic fluid can be highly pressurised even when the engine is switched off. Escaping pressurised hydraulic fluid can
penetrate the skin and cause serious injury. To release residual hydraulic pressure:
1. Shut off the engine.
2. Move the control valves back and forth, from one travel limit to the other, at least four times.
3. Hold the valve for three seconds at each travel limit.
WARNING
Skin injection hazard.
High-pressure fluid can inject under the skin and cause serious injury, including amputation.
-Make sure all connections are tight before applying pressure. Relieve system pressure before servicing.
-Do not check for leaks by hand. Instead, use a piece of cardboard to check for leaks.
-If a cut injury occurs, seek professional medical help immediately.
Summary of Contents for MONZA TTG15T
