![background image](http://html1.mh-extra.com/html/omega/lvcn400-series/lvcn400-series_user-manual_4182273011.webp)
11
Handling
Probes:
Fig. 3
Fig. 4
Fig. 5
Fig. 1
Fig. 2
Care should be taken when handling and installing
probes with coated rods to avoid scratching them.
Scratching the coating could interfere with the
probe performance.
Periodic visual inspection of the probe is required
to check for corrosion or deposit build-up. If
deposits are found, clean the sensor to ensure
optimum performance.
The probe should not be dropped or suffer any
impact or fall that could damage the electronics or
the coating of the probe. (Fig. 4 and 5)
Seal the thread with Teflon tape before
installation. (Fig. 1)
Do not turn or handle by the housing. (Fig. 2)
When tightening the sensor, use only use the
316S.S. hexagon fitting to achieve a seal, do not
twist with the body of the sensor. (Fig. 3)
When cleaning the rod use a soft brush or rag.
www.omega.com e-mail: [email protected]
Summary of Contents for LVCN400 Series
Page 1: ...LVCN4300 LVCN400 Series Capacitive Level Measurement...
Page 2: ......
Page 14: ......
Page 15: ...M 3995 0912...