M20013 REL-0000 (2103)
User Manual HHP460 Smart Manometer with Altimeter & Air Speed Test
24 of 72
Name
Key
Description
Backlight
• It provides three levels of brightness
and off.
The Information key and the Home screen
The Information menu provides you with details about the Smart
Manometer and sensors.
Depending on what is attached to the Smart Manometer and
depending on what is selected in the bottom row in the LCD
display, determines what data appears.
1.
Batt %
displays the percentage on the bar graph and in digits
or it displays the words
USB POWER.
2.
SEA LEVEL CORRECTION:
On or Off
3.
ALTITUDE CORRECTION:
On or Off
4. If you have an Omega Tethered Sensors attached to the Smart
Manometer.
-- P1 --
or
-- P2 --
Note:
the bottom row indicates sensor (or measurement type):
compound, absolute, or differential. All the following sensor
information describes the sensor indicated by
P1
or
P2
.
5.
CAL DATE
6.
USL
is an abbreviation for
upper sensor limit
.
7.
LSL
is an abbreviation for
lower sensor limit.
8.
LT MAX %
displays the Life-Time Maximum that has been
reached on the sensor.
9.
SENSOR F/W
VERS
F/W is an abbreviation for
firmware
(this
message scrolls to display the information).
10.
SENSOR S/N
S/N is an abbreviation for
serial number
(this message scrolls to display the information).
Note:
SNSR NAME
appears only with an Omega Tethered
Sensors (this message scrolls to display the information).
11.
DEV F/W
VER
DEV is an abbreviation for
device;
it refers
to the Smart Manometer
(this message scrolls to display the
information).
12.
DEV S/N
(this message scrolls to display the information).
13.
DEV NAME
(this message scrolls to display the information).
