M20013 REL-0000 (2103)
User Manual HHP460 Smart Manometer with Altimeter & Air Speed Test
15 of 72
Altitude Correction in Feet (Meters)
This
User Defined Altitude
function is useful in determining an
elevation change from a map elevation reference or from a survey
trig marker elevation. Follow the on-screen instructions to set up
the HHP400 to display altitude based on data you enter.
1. Press the
Backward
key three times from the home screen to
display ALTITUDE CORRECTION IN FEET TAP
√
TO CHANGE.
2. Press the
Accept
(
√ )
key to enter the change screen.
3. The HHP400 displays the following message:
ENABLE ALTITUDE OFFSET?
√
-YES X-NO
1. Pressing the
Cancel
(X) key returns you to the ALTITUDE
CORRECTION IN FEET TAP
√
TO CHANGE screen.
2. Pressing the
Accept
(
√
) key displays
Altitude Offset
options:
Note: When you
Enable
the Altitude Offset, an asterisk (
*
)
appears on the Home, the ALT FEET, and IAS MPH screens
to indicate that either an Altitude Offset or Sea Level Offset
has been set or both of Offsets have been set. Pressing the
Information
key displays ON or OFF for each active offset so
you can easily determine which offsets are active.
4. The HHP400 displays the following message:
ALT OFFSET IN FEET
√
SAVES X CANCELS 0 CLEARS
1. Pressing the
Up
or
Down
arrows on the keypad changes
the first digit and pressing the
Right
or Left arrows moves
the blinking cursor right or left. Enter your
Defined Altitude
data by using the arrow keys.
2.
Information:
0 Clears
refers to the
Zero
key. Pressing it
clears any numbers you entered after pressing the Up or
Down arrow keys.
