![background image](http://html1.mh-extra.com/html/omega/hh931t/hh931t_user-manual_737729028.webp)
Operating Instructions
3-13
Recall Saved Measurement Data
Press
to recall and review measurement data stored in instrument memory. The first
saved measurement and time/date stamp is shown on the display. The CLK indicator is lit
when the time stamp is displayed, and is off when the date stamp is displayed.
Press
to step through the saved measurements. Press
again to return to active
measurement mode.
Invalid Measurement Indications
The LCD display indicates when a measurement or statistic is invalid, as shown in Figure 11
below.
I
NDICATION
D
ESCRIPTION
- Or -
The current measurement or statistic is over-range for the selected
thermocouple type
- Ur -
The current measurement or statistic is under-range for the
selected thermocouple type
OPEn
No probe is connected or the probe sensor is faulty
————
Cannot compute a valid statistical result
Figure 11: Invalid Measurement Indications
Summary of Contents for HH931T
