12
Set up critical value of alarm:
Set up main display shows (T1 or T2) critical value level of the alarm, secondary
display shows high critical value of the alarm and
third display shows low critical value of the alarm.
Begun from the set up value directly when there is
set up critical value the alarm. While use not
choosing type function of thermocouple or
temperature unit to choose function and use not
setting up critical value of alarm, the high, low
critical value of alarm shows that can be
measured for every type thermocouple highest
and minimum temperature value, adjust to you
want and press key again to finish setting up.
Can set up the range in every type thermocouple:
K-TYPE
：
：
：
：
-200 to 1372°C (-328 to 2501°F)
-210 to 1200°C (-346 to 2192°F)
-250 to 400°C (-418 to 752°F)
-210 to 1000°C (-346 to 1832°F)
-150 to 1300°C (-238 to 2372°F)
J-TYPE
：
：
：
：
T-TYPE
：
：
：
：
E-TYPE
：
：
：
：
0 to 1767°C (32 to 3212°F)
：
R
、
、
、
、
S-TYPE
N-TYPE
：
：
：
：
＞
Press to add one-figure upward that adjusted.
＞
Press to minus one-figure downward that adjusted.
＞
Press to move right one-figure that adjusted.
＞
Press to move left one-figure that adjusted.
The sections set up of order setting record:
Divide into the sections of order setting record (circulation of
every day) and (circulation of every year). Can only choose one to set up, every kind can be set up for 9
sections at most.
Choose circulation of every day or circulation of
every year:
Can press key to switch over and
choose circulation of every day or circulation of
every year under not finishing the set up in any
section.
To delete the set up sections of circulation of every
day:
Press key then press key, when main
display shows CLEA then press key to finish
deleting.
C
F
MAX
MIN
SET
SET
MAX
MIN
SET
SET
C
F
SET
SET
Summary of Contents for HH127
Page 22: ...19 NOTES ...
