10
Section 5 - Specifications
Flow Transmitter
Accuracy:
± 2% of full scale
Repeatability:
± 1% of full scale
Power:
Regulated 9 to 18 Vdc @ 50 mA max
Input:
DC Pulse from Paddlewheel
Output:
3-Wire 4 to 20 mA or 1 to 5 Vdc
Max Loop Resistance:
Ohms = (V supply - 9 V)/0.02 A
Temperature Transmitter
Accuracy:
± 1.7°C (3°F)
Repeatability:
± 0.2°C (0.4°F)
Range:
0 to 100°C (32 to 212°F)
Power:
Regulated 9 to 18 Vdc @ 30 mA max
Output:
2-Wire 4 to 20 mA or 1 to 5 Vdc
Max Loop Resistance:
Ohms = (V supply - 9 V)/0.02 A
General
NON-WETTED MATERIALS
Transmitter Housing:
NEMA Rated - Painted Cast Aluminum
WETTED MATERIALS
Sensor Body:
Polypropylene body (PVDF optional),
PVDF paddle, Viton O-ring, 316SS shaft.
Model FP7002A includes brass locking
nut. Model FP7002 includes PVC locking
nut.
MAX, RECOMMENDED
FLUID VISCOSITY:
5 centipoise
FLUID TEMPERATURE/
Do not exceed the maximum ratings of
PRESSURE RANGE:
your piping. Depending on the material
of the fitting, the operating temperature/
pressure may be limited by your piping,
and not by the sensor. For all PVC tee
fittings, do not exceed 150 psig @ 27°C
(80°F), 100 psig @ 38°C (100°F), 60 psig @
49°C (120°F), 30 psig @ 60°C (140°F), due
to the insert in the tee. FP7000 sensor: 0°
to 26°C (32° to 80°F) up to 150 psig; max
pressure decreases 1.1 psig per each 1°F
about 80°F for a max. temperature of
200°F at 18 psig max.
5
FP7002/FP7002A Flow/Temperature Transmitter
