Page - 3
This Booklet Contains
Introduction to the System ..................................................... 4-6
Status Light, Valet Switch, Controller & Transmitter
System Versatility -
An Important Note .........................................
6
Using the Exclibur System ...................................................... 7
Arming Using the Controller or Transmitter .......................... 7-8
Arming Bypass, Sensor Bypass
Automatic “Last Door Arming” of the System ....................... 8-9
While the System is Armed, and should it Trigger ................. 9-10
Prewarning
Disarming the System Using the Controller or Transmitter ... 10-11
Safety Disarm Feature; Activation Alert; Automatic Rearming
Disarming By Emergency Override ........................................ 11-12
Remote Panic Feature .............................................................. 12
Other Controller and Transmitter Operations ......................... 13
Silent Arming & Disarming
,
Sensor Bypass;2nd, 3rd, 4th & 5th Channels
Using the Valet Switch ............................................................ 14-15
SecureCode .............................................................................. 15
The Status Light ...................................................................... 16
2-Way Controller ..................................................................... 17-20
Icons & Programming
Anti-Carjacking Protection ..................................................... 21
Controller and Transmitter Protection .................................... 22
How to Program Controllers or Transmitters ......................... 22-23
Programmable Features List .................................................... 24
How to Program Features ........................................................ 25-26
Programmable Features Descriptions ..................................... 26-34
Programmable Features Matrix ............................................... 35
Limited Lifetime Warranty .............................................. Back Cover
Note:
Features #23 and #24 involve two outputs of the Excalibur control unit
which give the installer greater flexibility. These outputs can be programmed
to perform several different functions. The primary function, or default setting,
of these outputs are designed to control the vehicles parking light circuit and
honk the vehicle’s horn.
But there are also several other functions of these two outputs which may be
programmed to operate, and more importantly, they must be configured by the
installer to perform the desired operations.
Page - 34
The final 3 Programmable Features are for the installer’s use.
Feature #24 Horn Honk Output Functions
Factory Default Setting
Horn Honk Output
(
press
“disarm/unlock” button to program
)
Options:
OEM Alarm Disarm Output (
press
“arm/lock” button to program
)
Channel 5 Latch Output
(
press
“
II
” button to program
)
Channel 5 On Demand Output (
press
“
III
” button to program
)
The default setting of this feature is to operate the vehicle’s existing horn; either
in conjunction with the electronic siren, or in place of the siren. Using both the
siren and the horn creates an extremely effective security system, and be
configured in many vehicles without further parts. The remaining options are
OEM alarm disarm, and Channel 5, with the same operation parameters as
described above for Channel 4, except that the “disarm/unlock” and “
III”
buttons
operate it, and Feature #21 can also change this channel’s button assignment.
Feature #23 (-) Parking Light Output Functions
Factory Default Setting
Parking Light Flash Output
(
press
“disarm/unlock” button to program
)
Options:
OEM Alarm Arm Output
(
press
“arm/lock” button to program
)
Channel 4 Latch Output
(
press
“
II
” button to program
)
Channel 4 On Demand Output (
press
“
III
” button to program
)
The default setting of this feature is to provide a negative flashing light output.
Options for this output are a (-) OEM alarm arm output, which is more frequently
encountered in newer vehicles. Other options are an additional remote output,
operated by the transmitter’s “arm/lock” and “
II”
buttons together, and in two
forms of operation: “Latch”, in which the output toggles (i.e.- turns on and turns
off) with each buttons press, and “On Demand” which is output occurring while
the buttons are being pressed. Feature #21 can change this channel’s button
assignment.
