background image

   10/02   MO/I_Echo

Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the Company), are

warranted to be free from defects in materials and workmanship under normal use.  If a product sold by the
Company proves to be defective, the Company will repair or replace it free of charge within the first year and
thereafter all parts to be repaired will be free with only a nominal charge for Omega Research and Development,
Inc.'s labor and return shipping, to the original owner during the lifetime of the car in which it was originally
installed.

All products for warranty repair must be sent postage prepaid to Omega Research & Development, Inc.,

P.O. Box 508, Douglasville, Georgia 30133, with bill of sale or other dated proof of purchase. This warranty is
nontransferable and does not apply to any product damaged by accident, physical or electrical misuse or abuse,
improper installation, alteration, any use contrary to its intended function, unauthorized service, fire, flood,
lightning, or other acts of God.

This warranty limits the Company's liability to the repair or replacement of the product. The Company shall

not be responsible for removal and/or reinstallation charges, damage to or theft of the vehicle or its contents, or
any incidental or consequential damages caused by any failure or alleged failure of the product to function
properly. Under No Circumstances Should This Warranty, Or The Product Covered By It, Be Construed As A
Guarantee Or Insurance Policy Against Loss. The Company neither assumes nor authorizes any person or
organization to make any Warranties or assume any liability in connection with the sale, installation, or use of
this product.

L I M I T E D     L I F E T I M E     W A R R A N T Y

This device complies with FCC Rules part 15. Operation is subject to the following two conditions, (1) This
device may not cause harmful interference and, (2) This device must accept any interference that may be
received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user's authority to operate the equipment.

COPYRIGHT  2002: OMEGA RESEARCH & DEVELOPMENT, INC.

Omega

Echo

 OPERATION GUIDE &

INSTALLATION MANUAL

2-Way Controller Transceiver

FRONT  COVER

PRINTER’S NOTE:

production front cover

is gray scale; this is a

place marker cover.

BACK  COVER

PRINTER’S NOTE:

production back cover

is to be printed with gray

scale front cover; this is a

place marker cover.

Summary of Contents for Echo







Reviews: