Warning
4
WARNING
This device is designed for connection to hazardous electric voltages. Ignoring this
warning can result in severe personal injury or mechanical damage.
To avoid the risk of electric shock and fire, the safety instructions of this guide must be
observed and the guidelines followed. The specifications must not be exceeded, and
the device must only be applied as described in the following.
Prior to the commissioning of the device, this installation guide must be examined
carefully.
Only qualified personnel (technicians) should install this device.
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
GENERAL
WARNING
Until the device is fixed, do not connect hazardous voltages to the device. The
following operations should only be carried out on a disconnected device and under
ESD safe conditions:
General mounting, connection and disconnection of Modbus cable.
Troubleshooting the device.
HAZARD OUS
VOLTAGE
Triangle with an exclamation mark: Read the manual before installation
and commissioning of the device in order to avoid incidents that could lead
to personal injury or mechanical damage.
The CE mark proves the compliance of the device with the essential
requirements of the directives.
The double insulation symbol shows that the device is protected by double
or reinforced insulation.
Repair of the device must be done by Omega A/S only.
WARNING
CAUTION
1
Section 1.2 - Symbol Identification
